Search results for "deflection [cosmic radiation]"
showing 10 items of 18 documents
Heat in Metal Cutting
2008
This chapter provides comprehensive knowledge regarding thermal effects during the cutting process with both uncoated and coated cutting tools. Main heat sources and flowing heat fluxes into the tool, chip and workpiece are characterized and quantified. The heat distribution models that allow the analytical prediction of heat partition between the tool and the chip are specified. They consider such thermal properties as specific heat, thermal conductivity and diffusivity, Peclet thermal number, and heat transmission ratio, all as functions of temperature. Finite element method and finite difference method simulations applied to the prediction of temperature fields are outlined for turning a…
Vessel shape alterations of the vertebrobasilar arteries in Mucopolysaccharidosis type IVa (Morquio A) patients.
2017
Main symptom of mucopolysaccharidosis type IVa (MPS IVa) is progressive systemic skeletal dysplasia. This is routinely monitored by cerebral and spinal MRI. The vascular system is generally not in the primary focus of interest. In our population of MPS IVa patients we observed vessel shape alterations of the vertebrobasilar arteries, which has not been described before.MRI-datasets of 26 patients with MPS IVa acquired between 2008 and 2015 were eligible for retrospective analysis of the vertebrobasilar arteries. The vessel length and angle of the basilar artery (BA) and both vertebral arteries (VA) were analyzed. A deflection angle between 90° and 130° in the vessel course was defined as to…
Flexural behavior of corroded RC beams
2018
Synopsis: A handily model to evaluate the bending resistance and the ductility of corroded beams critical in flexure and shear is proposed and debated. Effects of diffused and pitting corrosion on steel bars, compressive concrete strength reduction and concrete bond strength reduction due to rust creation are modelled. Practical method derived on limit state theory was here used to calculate the flexural and shear strength and the available ductility. The effectiveness of the model was also corroborated against numerous results collected in the literature pertaining to bending and shear resistance.
Flexural behaviour of external R/C steel fibre reinforced beam-column joints
2011
ABSTRACT A softened strut-and-tie macro model able to reproduce the flexural behaviour of external beam-column joint is presented. The model is specific for concrete with hooked steel fibres (FRC) and it is designed to calculate the flexural response, as load-deflection curve, of a beam-column sub-assemblages. The model considers the presence of a constant vertical load acting on the column and of a monotonically increasing lateral force applied at the tip of the beam.
Flexural behavior of external beam-column reinforced concrete assemblages externally strengthened with steel cages
2016
In this paper, an experimental study referring to the flexural behavior of full-scale external beam-column joints externally strengthened with steel angles and strips and subjected to cyclic reversal loading is presented. One control specimen and five other specimens having the same characteristics as the control specimen but strengthened with steel angles and strips along beams and columns, and characterized by different configurations of strengthening in the critical regions, were tested. The control specimen was designed with a weak column and strong beam to reproduce the most common cases of old frame structures in the Mediterranean area, which were designed only for gravity loads and a…
Resolving Point Defects in the Hydration Structure of Calcite (10.4) with Three-Dimensional Atomic Force Microscopy
2018
It seems natural to assume that defects at mineral surfaces critically influence interfacial processes such as the dissolution and growth of minerals in water. The experimental verification of this claim, however, is challenging and requires real-space methods with utmost spatial resolution, such as atomic force microscopy (AFM). While defects at mineral-water interfaces have been resolved in 2D AFM images before, the perturbation of the surrounding hydration structure has not yet been analyzed experimentally. In this Letter, we demonstrate that point defects on the most stable and naturally abundant calcite (10.4) surface can be resolved using high-resolution 3D AFM-even within the fifth h…
Atomic Force Microscopy and Spectroscopy
2021
Atomic force microscopy (AFM) is probably the most celebrated technique falling into the family of experimental methods known as scanning probe microscopy. AFM is primarily designed to obtain the morphology of the surface of a solid material by using the force of interaction between an inert probe and the sample. The AFM microscope can generally be operated in many ways for morphology investigations, but they can be roughly classified into two main groups: static- and dynamic-deflection modes. Since atomic force microscopy makes use of tip-surface interaction to reconstruct the surface morphology of materials, it is of fundamental importance to fully understand the nature and properties of …
Engineering failure analysis of corroded R.C. beams in flexure and shear
2018
Abstract In the present paper, a simple model to reproduce the load-deflection response of corroded beams failing in flexure and shear is presented and discussed. Effects of diffused and pitting corrosion on steel bars, compressive concrete strength degradation and concrete bond strength degradation due to rust formation are included in the model. Engineering approach based on limit state theory was here adopted to predict the peak and the residual flexural and shear strength of corroded beams with corresponding deflections and ductility estimation. Calculation of deflection at cracking taking into account of rust formation and deflection at yielding and the ultimate state taking into accou…
Behaviour of concrete deep beams with openings and low shear span-to-depth ratio
2012
Abstract The goal of this study is to experimentally and analytically evaluate the influence of circular openings in reinforced concrete deep beams with low shear span-to-depth ratio. Twenty reinforced concrete small-scale deep beams with or without openings were tested in flexure under four-point loading. The beams had a small shear span-to-depth ratio in order to stress the shear behavior. The specimens had different reinforcement arrangements and opening positions. The load was transmitted to the specimen with bearing plates having the same side length as the beam. Two LVDT’s were arranged to record the transverse and axial strain of the theoretical struts forming in the beam. Additional…
Effect of adding wood flour to the physical properties of a biodegradable polymer
2008
Wood flour/polymer composites (WPC) gained a significant interest during the last decades, due to several advantages related to the use of a natural-organic filler rather than an inorganic-mineral one. However, most of the studies have been performed on composites based on polyolefin matrices. A further step is the use of biodegradable polymers instead of traditional ones. In this work, wood flour (WF), under the form of short fibers, with two different sizes (coarse and fine) was added to a corn starch based biodegradable polymer of the Mater-Bi family. The effect of WF size, WF content, thermal treatment on the mechanical properties was investigated. The tensile mechanical tests showed an…